Metal roof leaks
Fasteners, washers and seams
Attic ventilation works as a pair: intake low at the soffits, exhaust high at the ridge. Get the balance wrong — or block the intake with insulation pushed into the eaves — and the roof space stops breathing. The result shows up as condensation on the underside of the decking, as shortened shingle life from trapped heat, and in colder parts of the state as ice damming, because a warm roof melts snow that then refreezes over the cold overhang. A lot of apparent leaks are actually ventilation problems.
Call (229) 592-0097Each area has its own page for roof and attic ventilation.
Routinely. Condensation forming on cold decking drips onto insulation and shows up as damp patches that behave almost exactly like ingress. The tell is that it tracks cold weather rather than rain.
No. Mixing exhaust types — ridge vents and powered fans, say — can make a fan pull air from the ridge instead of the soffits, which short-circuits the whole system. Balance between intake and exhaust matters more than total area.
Fasteners, washers and seams
The secondary barrier under the covering
Single-ply flat roof membrane
Crown, cap and masonry
Keeping debris out of the gutter
Clearing, repair and replacement
Where a roof leaks in east Georgia usually tells you how old the house is. Chimneys and valleys on older stock, penetrations on newer builds. Both are fixable without replacing the roof.
Call (229) 592-0097